Clamping devices

Precision vice
starting from 495,00 CHF *
Precision vice
starting from 164,15 CHF *
Sinus table with precision vice, 0-80mm
2.060,00 CHF *

Shipping time Standardversand:
4 - 5 Werktage

Lieferzeit Expressversand:
1 - 3 Werktage

Sinus table with precision vice, 0-80mm
2.060,00 CHF *
Sinus table with precision vice, 0-80mm
4.060,00 CHF *

Shipping time Standardversand:
4 - 5 Werktage

Sine table, 150x150mm
775,95 CHF *
Sine Ruler
starting from 206,80 CHF *
Universal precision vice with 3-jaw chuck
3.325,00 CHF *

Shipping time Standardversand:
4 - 5 Werktage

Universal precision vice, 0-80mm
2.090,00 CHF *

Shipping time Standardversand:
4 - 5 Werktage

Lieferzeit Expressversand:
1 - 3 Werktage

Angle plate right-angled, 100x100x115mm
367,25 CHF *
Angle plate, right-angled, 100x100x150mm
669,35 CHF *

Shipping time Standardversand:
4 - 5 Werktage

Lieferzeit Expressversand:
1 - 3 Werktage

Angle plate, right-angled, 100x100x150mm
1.530,00 CHF *

Shipping time Standardversand:
4 - 5 Werktage

Lieferzeit Expressversand:
1 - 3 Werktage

Clamping fixtures for metrology: precise tools for exact results

All our Clamping fixtures are made of SKS tool steel. This material brings for Precision tools properties for precision tools. Our vises, sinusoidal tables and angle plates are Angle plates are particularly hard, corrosion-resistant and tensile. Even fluctuating ambient temperatures and similar environmental influences do not affect the properties of our high-precision tools.

Precision vices from insize: universal clamping devices for high demands

When it comes to clamping a small workpiece and highest precision is required, then a Precision vise from insize is the right choice. In our assortment you will find vises with different clamping lengths. The selection ranges from vises with 0 to 73 mm clamping length up to models with a maximum clamping length of 100 mm. The jaw width also varies between 50 and 98 mm. The precision vices are very precisely processed. The parallelism deviates by a maximum of four micrometers over 100 mm, while the perpendicularity deviates by a maximum of six micrometers over 100 mm.

A sinusoidal table from insize: the basis for precise grinding, measuring and eroding work

Sinusoidal tables are used for particularly fine work or checks on workpieces. The Sine tables from insize are available in different versions. On the one hand with fixing holes and on the other hand with scissors for fixing, which are attached laterally. The scissors allow a free angle adjustment in a range of 0 to 60 degrees, while the mounting holes offer predefined angle settings. Furthermore, you can find the tables in different sizes. The sinus tables from insize are available with table lengths between 130 and 345 mm as well as widths from 30 to 150 mm.

The sine vice: combination of precision vice and sine table

A special form of the precision vice is the Sine vice from insize represents. It is a combination of precision vice and sinus table. Our assortment offers you different model variants. For example the Universal precision vice with horizontal and vertical adjustability. The vice, which is permanently mounted on the table, can be adjusted horizontally by 360 degrees and vertically by 45 degrees via the centering clamp. Thanks to the adjustment steps of 0.05 degrees, the alignment of the workpiece can be precisely adjusted. These tables have freely adjustable clamping lengths in a range between 0 and 80 mm.

Angle plates from insize for measuring and control technology

Also included in our range of clamping fixtures are the Angle plates. We offer both plane and right-angled angle plates. The compact plates are available with side lengths between 100 and 150 mm. The plates are equipped with M6x1 or M8x1.25 sockets for fastening workpieces. In addition, we have angle plates in our range which have a V-receptacle for cylindrical workpieces. Parallelism and perpendicularity are given between all receptacles with a maximum deviation of six micrometers.