Description
sh-8ii 1 finger spring coiler 0.1-0.8mm
| Diameter: | 0.1-0.8mm |
Reviews
There are no reviews yet.
Question about item
Description
1-finger coiling machine for wire diameter 0.1 to 0.8 mm
- Equipped with 7 axes in standard: feed, knife, pitch, diameter, leg, winding finger (up/down) and msd-1 sensor
- Maximum outside diameter: 20mm
- Easier set-up and higher speed compared to the previous model, as the knife and the winding finger have a separate axis
- Suitable for high speed production of e.g. torsion springs, angular wound springs and compression springs.
Software mno, developed for easy setting of springs
- Easier operation for faster set up
- Highest resolution of servo motors
- Allows control of various parameters such as pitch, diameter, angle, etc
- Same program for compression and torsion springs
- Clear production control and data processing
- Compression springs easy to program using the graphics.
Cone spring
- Simple adjustment of the taper with a value from 0-100
- Readjustment of force or shape via simple value input 0-100
Optional accessories
- Mandrel v/h axis
- Slip sensor for detection of irregular wire retraction
- is-1 camera monitoring