Compression and torsion spring machineSH-3A

1-finger coiling machine for wire diameter 0.08 to 0.3 mm

• Equipped with 8 axes in standard: feed, knife, pitch, diameter, leg, winding finger (up/down), spring body and msd-1 sensor
• Easier set-up and higher speed compared to the previous model, as the knife and the winding finger have a separate axis
• Suitable for high speed production of e.g. antenna springs, torsion springs, angular wound springs and compression springs
• Optionally available is the micro wire device for wire thicknesses up to 0.08mm
• 
  

Software mno, developed for easy setting of springs

• Simple operation for faster set up
• Highest resolution servo motors
• Allows control of various parameters such as pitch, diameter, angle, etc
• Same program for compression and torsion springs
• Clear production control and data processing
• Compression springs easy to program via graphics
• 
  

Cone spring

• Simple adjustment of the taper with a value from 0-100
• Readjustment of force or shape via simple value input 0-100
• 
  

There are 3 different long wire guides for the sh-3ii winding machine

• Short wire guide with a length of 23mm. Gives a higher precision for short springs
• Standard wire guide length with 30mm. Allows the continued use of all existing tools Previous model
• Wire guide for micro springs with a length of 16mm. Allows coiling of wire thicknesses 0.08mm or smaller
• 
  

Optional accessories

• Mandrel v/h axis set
• Slip sensor for detection of irregular wire retraction
• is-1 camera monitoring