SH-3II 1 Finger Federwindemaschine 0.08-0.3mm

Artikelnummer: SH-3II

Kategorie: Torsions- und Formfedermaschinen

Preis auf Anfrage


1-point coiling machine with a wire diameter of 0.08 to 0.3 mm

  • Equipped with 8 standard axes: feed, cut, pitch, point, torsion, initial tension, coil front-back, and MSD-1.
  • Easier setup and greater speed than previous models, as the cut axis and torsion axis are separated.
  • Suitable for high-speed production of ballpoint pen springs, torsion springs, and elliptical springs in addition to standard cylindrical springs.
  • Optional ultra-thin wire attachment can be used to coil springs with a diameter of 0.08 mm or less.

  • Dedicated MNO Program for Spring Production

  • Easy operations for quicker preparation.
  • High resolution for controlling the latest servo motors.
  • Compatible with compression spring creation programs based on line graphs.
  • Allows varied control based on measurement results, such as the pitch and diameter.
  • Common program for both torsion machines and coiling machines.
  • Includes a motor sensor system.
  • Versatile production management screen and production data collection function.

  • Taper synchronization constant

  • Enables the taper tilt to be managed with a value from 0 to 100.
  • Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.

  • 3 types of wire guides

  • The SH-3II has 3 wire guides with different lengths:
  • Short guide with a guide length of 23 mm. Provides greater accuracy for short springs due to its shorter guide length, while retaining the same clearance length as a standard wire guide.
  • Standard wire guide with a guide length of 30 mm. Enables use of all tools available for the previous SH-3 wire guide.
  • Wire guide for ultra-thin wires with a guide length of 16 mm. Enables coiling of wires with a diameter of 0.08 mm or less.

  • Optional Equipment

  • Core forward/reverse servo unit
  • Slip sensor to detect slips in wire feeding
  • Capacitance level sensor
  • IS-1 shape detection unit with camera

  • Durchmesser: 0.08-0.3mm