Description
This twist drill has high stability, is designed for drilling without internal cooling, optimum chip breaking and short chips, use for hardened materials
Show all variations
- MB110.200 - Solid carbide twist drill 3xD without internal cooling, Ø20, AlTiN, 140°
- MB110.195 - Solid carbide twist drill 3xD without internal cooling, Ø19.5, AlTiN, 140°
- MB110.190 - Solid carbide twist drill 3xD without internal cooling, Ø19, AlTiN, 140°
- MB110.185 - Solid carbide twist drill 3xD without internal cooling, Ø18.5, AlTiN, 140°
- MB110.180 - Solid carbide twist drill 3xD without internal cooling, Ø18, AlTiN, 140°
- MB110.175 - Solid carbide twist drill 3xD without internal cooling, Ø17.5, AlTiN, 140°
- MB110.170 - Solid carbide twist drill 3xD without internal cooling, Ø17, AlTiN, 140°
- MB110.165 - Solid carbide twist drill 3xD without internal cooling, Ø16.5, AlTiN, 140°
- MB110.160 - Solid carbide twist drill 3xD without internal cooling, Ø16, AlTiN, 140°
- MB110.155 - Solid carbide twist drill 3xD without internal cooling, Ø15.5, AlTiN, 140°
- MB110.150 - Solid carbide twist drill 3xD without internal cooling, Ø15, AlTiN, 140°
- MB110.148 - Solid carbide twist drill 3xD without internal cooling, Ø14.8, AlTiN, 140°
- MB110.145 - Solid carbide twist drill 3xD without internal cooling, Ø14.5, AlTiN, 140°
- MB110.140 - Solid carbide twist drill 3xD without internal cooling, Ø14, AlTiN, 140°
- MB110.138 - Solid carbide twist drill 3xD without internal cooling, Ø13.8, AlTiN, 140°
- MB110.135 - Solid carbide twist drill 3xD without internal cooling, Ø13.5, AlTiN, 140°
- MB110.131 - Solid carbide twist drill 3xD without internal cooling, Ø13.1, AlTiN, 140°
- MB110.130 - Solid carbide twist drill 3xD without internal cooling, Ø13, AlTiN, 140°
- MB110.128 - Solid carbide twist drill 3xD without internal cooling, Ø12.8, AlTiN, 140°
- MB110.127 - Solid carbide twist drill 3xD without internal cooling, Ø12.7, AlTiN, 140°
- MB110.125 - Solid carbide twist drill 3xD without internal cooling, Ø12.5, AlTiN, 140°
- MB110.122 - Solid carbide twist drill 3xD without internal cooling, Ø12.2, AlTiN, 140°
- MB110.120 - Solid carbide twist drill 3xD without internal cooling, Ø12, AlTiN, 140°
- MB110.119 - Solid carbide twist drill 3xD without internal cooling, Ø11.9, AlTiN, 140°
- MB110.118 - Solid carbide twist drill 3xD without internal cooling, Ø11.8, AlTiN, 140°
- MB110.117 - Solid carbide twist drill 3xD without internal cooling, Ø11.7, AlTiN, 140°
- MB110.116 - Solid carbide twist drill 3xD without internal cooling, Ø11.6, AlTiN, 140°
- MB110.115 - Solid carbide twist drill 3xD without internal cooling, Ø11.5, AlTiN, 140°
- MB110.114 - Solid carbide twist drill 3xD without internal cooling, Ø11.4, AlTiN, 140°
- MB110.113 - Solid carbide twist drill 3xD without internal cooling, Ø11.3, AlTiN, 140°
- MB110.112 - Solid carbide twist drill 3xD without internal cooling, Ø11.2, AlTiN, 140°
- MB110.111 - Solid carbide twist drill 3xD without internal cooling, Ø11.1, AlTiN, 140°
- MB110.110 - Solid carbide twist drill 3xD without internal cooling, Ø11, AlTiN, 140°
- MB110.109 - Solid carbide twist drill 3xD without internal cooling, Ø10.9, AlTiN, 140°
- MB110.108 - Solid carbide twist drill 3xD without internal cooling, Ø10.8, AlTiN, 140°
- MB110.107 - Solid carbide twist drill 3xD without internal cooling, Ø10.7, AlTiN, 140°
- MB110.106 - Solid carbide twist drill 3xD without internal cooling, Ø10.6, AlTiN, 140°
- MB110.105 - Solid carbide twist drill 3xD without internal cooling, Ø10.5, AlTiN, 140°
- MB110.104 - Solid carbide twist drill 3xD without internal cooling, Ø10.4, AlTiN, 140°
- MB110.103 - Solid carbide twist drill 3xD without internal cooling, Ø10.3, AlTiN, 140°
- MB110.102 - Solid carbide twist drill 3xD without internal cooling, Ø10.2, AlTiN, 140°
- MB110.101 - Solid carbide twist drill 3xD without internal cooling, Ø10.1, AlTiN, 140°
- MB110.100 - Solid carbide twist drill 3xD without internal cooling, Ø10, AlTiN, 140°
- MB110.099 - Solid carbide twist drill 3xD without internal cooling, Ø9.9, AlTiN, 140°
- MB110.098 - Solid carbide twist drill 3xD without internal cooling, Ø9.8, AlTiN, 140°
- MB110.097 - Solid carbide twist drill 3xD without internal cooling, Ø9.7, AlTiN, 140°
- MB110.096 - Solid carbide twist drill 3xD without internal cooling, Ø9.6, AlTiN, 140°
- MB110.095 - Solid carbide twist drill 3xD without internal cooling, Ø9.5, AlTiN, 140°
- MB110.094 - Solid carbide twist drill 3xD without internal cooling, Ø9.4, AlTiN, 140°
- MB110.093 - Solid carbide twist drill 3xD without internal cooling, Ø9.3, AlTiN, 140°
- MB110.092 - Solid carbide twist drill 3xD without internal cooling, Ø9.2, AlTiN, 140°
- MB110.091 - Solid carbide twist drill 3xD without internal cooling, Ø9.1, AlTiN, 140°
- MB110.090 - Solid carbide twist drill 3xD without internal cooling, Ø9, AlTiN, 140°
- MB110.089 - Solid carbide twist drill 3xD without internal cooling, Ø8.9, AlTiN, 140°
- MB110.088 - Solid carbide twist drill 3xD without internal cooling, Ø8.8, AlTiN, 140°
- MB110.087 - Solid carbide twist drill 3xD without internal cooling, Ø8.7, AlTiN, 140°
- MB110.086 - Solid carbide twist drill 3xD without internal cooling, Ø8.6, AlTiN, 140°
- MB110.085 - Solid carbide twist drill 3xD without internal cooling, Ø8.5, AlTiN, 140°
- MB110.084 - Solid carbide twist drill 3xD without internal cooling, Ø8.4, AlTiN, 140°
- MB110.083 - Solid carbide twist drill 3xD without internal cooling, Ø8.3, AlTiN, 140°
- MB110.082 - Solid carbide twist drill 3xD without internal cooling, Ø8.2, AlTiN, 140°
- MB110.081 - Solid carbide twist drill 3xD without internal cooling, Ø8.1, AlTiN, 140°
- MB110.080 - Solid carbide twist drill 3xD without internal cooling, Ø8, AlTiN, 140°
- MB110.079 - Solid carbide twist drill 3xD without internal cooling, Ø7.9, AlTiN, 140°
- MB110.078 - Solid carbide twist drill 3xD without internal cooling, Ø7.8, AlTiN, 140°
- MB110.077 - Solid carbide twist drill 3xD without internal cooling, Ø7.7, AlTiN, 140°
- MB110.076 - Solid carbide twist drill 3xD without internal cooling, Ø7.6, AlTiN, 140°
- MB110.075 - Solid carbide twist drill 3xD without internal cooling, Ø7.5, AlTiN, 140°
- MB110.074 - Solid carbide twist drill 3xD without internal cooling, Ø7.4, AlTiN, 140°
- MB110.073 - Solid carbide twist drill 3xD without internal cooling, Ø7.3, AlTiN, 140°
- MB110.072 - Solid carbide twist drill 3xD without internal cooling, Ø7.2, AlTiN, 140°
- MB110.071 - Solid carbide twist drill 3xD without internal cooling, Ø7.1, AlTiN, 140°
- MB110.070 - Solid carbide twist drill 3xD without internal cooling, Ø7, AlTiN, 140°
- MB110.069 - Solid carbide twist drill 3xD without internal cooling, Ø6.9, AlTiN, 140°
- MB110.068 - Solid carbide twist drill 3xD without internal cooling, Ø6.8, AlTiN, 140°
- MB110.067 - Solid carbide twist drill 3xD without internal cooling, Ø6.7, AlTiN, 140°
- MB110.066 - Solid carbide twist drill 3xD without internal cooling, Ø6.6, AlTiN, 140°
- MB110.065 - Solid carbide twist drill 3xD without internal cooling, Ø6.5, AlTiN, 140°
- MB110.064 - Solid carbide twist drill 3xD without internal cooling, Ø6.4, AlTiN, 140°
- MB110.063 - Solid carbide twist drill 3xD without internal cooling, Ø6.3, AlTiN, 140°
- MB110.062 - Solid carbide twist drill 3xD without internal cooling, Ø6.2, AlTiN, 140°
- MB110.061 - Solid carbide twist drill 3xD without internal cooling, Ø6.1, AlTiN, 140°
- MB110.060 - Solid carbide twist drill 3xD without internal cooling, Ø6, AlTiN, 140°
- MB110.059 - Solid carbide twist drill 3xD without internal cooling, Ø5.9, AlTiN, 140°
- MB110.058 - Solid carbide twist drill 3xD without internal cooling, Ø5.8, AlTiN, 140°
- MB110.057 - Solid carbide twist drill 3xD without internal cooling, Ø5.7, AlTiN, 140°
- MB110.056 - Solid carbide twist drill 3xD without internal cooling, Ø5.6, AlTiN, 140°
- MB110.055 - Solid carbide twist drill 3xD without internal cooling, Ø5.5, AlTiN, 140°
- MB110.054 - Solid carbide twist drill 3xD without internal cooling, Ø5.4, AlTiN, 140°
- MB110.053 - Solid carbide twist drill 3xD without internal cooling, Ø5.3, AlTiN, 140°
- MB110.052 - Solid carbide twist drill 3xD without internal cooling, Ø5.2, AlTiN, 140°
- MB110.051 - Solid carbide twist drill 3xD without internal cooling, Ø5.1, AlTiN, 140°
- MB110.050 - Solid carbide twist drill 3xD without internal cooling, Ø5, AlTiN, 140°
- MB110.049 - Solid carbide twist drill 3xD without internal cooling, Ø4.9, AlTiN, 140°
- MB110.048 - Solid carbide twist drill 3xD without internal cooling, Ø4.8, AlTiN, 140°
- MB110.047 - Solid carbide twist drill 3xD without internal cooling, Ø4.7, AlTiN, 140°
- MB110.046 - Solid carbide twist drill 3xD without internal cooling, Ø4.6, AlTiN, 140°
- MB110.045 - Solid carbide twist drill 3xD without internal cooling, Ø4.5, AlTiN, 140°
- MB110.044 - Solid carbide twist drill 3xD without internal cooling, Ø4.4, AlTiN, 140°
- MB110.043 - Solid carbide twist drill 3xD without internal cooling, Ø4.3, AlTiN, 140°
- MB110.042 - Solid carbide twist drill 3xD without internal cooling, Ø4.2, AlTiN, 140°
- MB110.041 - Solid carbide twist drill 3xD without internal cooling, Ø4.1, AlTiN, 140°
- MB110.040 - Solid carbide twist drill 3xD without internal cooling, Ø4, AlTiN, 140°
- MB110.039 - Solid carbide twist drill 3xD without internal cooling, Ø3.9, AlTiN, 140°
- MB110.038 - Solid carbide twist drill 3xD without internal cooling, Ø3.8, AlTiN, 140°
- MB110.037 - Solid carbide twist drill 3xD without internal cooling, Ø3.7, AlTiN, 140°
- MB110.036 - Solid carbide twist drill 3xD without internal cooling, Ø3.6, AlTiN, 140°
- MB110.035 - Solid carbide twist drill 3xD without internal cooling, Ø3.5, AlTiN, 140°
- MB110.034 - Solid carbide twist drill 3xD without internal cooling, Ø3.4, AlTiN, 140°
- MB110.033 - Solid carbide twist drill 3xD without internal cooling, Ø3.3, AlTiN, 140°
- MB110.032 - Solid carbide twist drill 3xD without internal cooling, Ø3.2, AlTiN, 140°
- MB110.031 - Solid carbide twist drill 3xD without internal cooling, Ø3.1, AlTiN, 140°
- MB110.030 - Solid carbide twist drill 3xD without internal cooling, Ø3, AlTiN, 140°