Description
This twist drill has high stability, is designed for drilling without internal cooling, optimum chip breaking and short chips, use for hardened materials
Show all variations
- MB120.200 - Solid carbide twist drill 5xD, without internal cooling, Ø20, AlTiN, 140°
- MB120.195 - Solid carbide twist drill 5xD, without internal cooling , Ø19.5, AlTiN, 140°
- MB120.190 - Solid carbide twist drill 5xD, without internal cooling , Ø19, AlTiN, 140°
- MB120.185 - Solid carbide twist drill 5xD, without internal cooling , Ø18.5, AlTiN, 140°
- MB120.180 - Solid carbide twist drill 5xD, without internal cooling , Ø18, AlTiN, 140°
- MB120.175 - Solid carbide twist drill 5xD, without internal cooling , Ø17.5, AlTiN, 140°
- MB120.170 - Solid carbide twist drill 5xD, without internal cooling , Ø17, AlTiN, 140°
- MB120.165 - Solid carbide twist drill 5xD, without internal cooling , Ø16.5, AlTiN, 140°
- MB120.160 - Solid carbide twist drill 5xD, without internal cooling , Ø16, AlTiN, 140°
- MB120.155 - Solid carbide twist drill 5xD, without internal cooling , Ø15.5, AlTiN, 140°
- MB120.150 - Solid carbide twist drill 5xD, without internal cooling , Ø15, AlTiN, 140°
- MB120.148 - Solid carbide twist drill 5xD, without internal cooling , Ø14.8, AlTiN, 140°
- MB120.145 - Solid carbide twist drill 5xD, without internal cooling , Ø14.5, AlTiN, 140°
- MB120.140 - Solid carbide twist drill 5xD, without internal cooling , Ø14, AlTiN, 140°
- MB120.138 - Solid carbide twist drill 5xD, without internal cooling , Ø13.8, AlTiN, 140°
- MB120.135 - Solid carbide twist drill 5xD, without internal cooling , Ø13.5, AlTiN, 140°
- MB120.131 - Solid carbide twist drill 5xD, without internal cooling , Ø13.1, AlTiN, 140°
- MB120.130 - Solid carbide twist drill 5xD, without internal cooling , Ø13, AlTiN, 140°
- MB120.128 - Solid carbide twist drill 5xD, without internal cooling , Ø12.8, AlTiN, 140°
- MB120.127 - Solid carbide twist drill 5xD, without internal cooling , Ø12.7, AlTiN, 140°
- MB120.125 - Solid carbide twist drill 5xD, without internal cooling , Ø12.5, AlTiN, 140°
- MB120.122 - Solid carbide twist drill 5xD, without internal cooling , Ø12.2, AlTiN, 140°
- MB120.120 - Solid carbide twist drill 5xD, without internal cooling , Ø12, AlTiN, 140°
- MB120.119 - Solid carbide twist drill 5xD, without internal cooling , Ø11.9, AlTiN, 140°
- MB120.118 - Solid carbide twist drill 5xD, without internal cooling , Ø11.8, AlTiN, 140°
- MB120.117 - Solid carbide twist drill 5xD, without internal cooling , Ø11.7, AlTiN, 140°
- MB120.116 - Solid carbide twist drill 5xD, without internal cooling , Ø11.6, AlTiN, 140°
- MB120.115 - Solid carbide twist drill 5xD, without internal cooling , Ø11.5, AlTiN, 140°
- MB120.114 - Solid carbide twist drill 5xD, without internal cooling , Ø11.4, AlTiN, 140°
- MB120.113 - Solid carbide twist drill 5xD, without internal cooling , Ø11.3, AlTiN, 140°
- MB120.112 - Solid carbide twist drill 5xD, without internal cooling , Ø11.2, AlTiN, 140°
- MB120.111 - Solid carbide twist drill 5xD, without internal cooling , Ø11.1, AlTiN, 140°
- MB120.110 - Solid carbide twist drill 5xD, without internal cooling , Ø11, AlTiN, 140°
- MB120.109 - Solid carbide twist drill 5xD, without internal cooling , Ø10.9, AlTiN, 140°
- MB120.108 - Solid carbide twist drill 5xD, without internal cooling , Ø10.8, AlTiN, 140°
- MB120.107 - Solid carbide twist drill 5xD, without internal cooling , Ø10.7, AlTiN, 140°
- MB120.106 - Solid carbide twist drill 5xD, without internal cooling , Ø10.6, AlTiN, 140°
- MB120.105 - Solid carbide twist drill 5xD, without internal cooling , Ø10.5, AlTiN, 140°
- MB120.104 - Solid carbide twist drill 5xD, without internal cooling , Ø10.4, AlTiN, 140°
- MB120.103 - Solid carbide twist drill 5xD, without internal cooling , Ø10.3, AlTiN, 140°
- MB120.102 - Solid carbide twist drill 5xD, without internal cooling , Ø10.2, AlTiN, 140°
- MB120.101 - Solid carbide twist drill 5xD, without internal cooling , Ø10.1, AlTiN, 140°
- MB120.100 - Solid carbide twist drill 5xD, without internal cooling , Ø10, AlTiN, 140°
- MB120.099 - Solid carbide twist drill 5xD, without internal cooling , Ø9.9, AlTiN, 140°
- MB120.098 - Solid carbide twist drill 5xD, without internal cooling , Ø9.8, AlTiN, 140°
- MB120.097 - Solid carbide twist drill 5xD, without internal cooling , Ø9.7, AlTiN, 140°
- MB120.096 - Solid carbide twist drill 5xD, without internal cooling , Ø9.6, AlTiN, 140°
- MB120.095 - Solid carbide twist drill 5xD, without internal cooling , Ø9.5, AlTiN, 140°
- MB120.094 - Solid carbide twist drill 5xD, without internal cooling , Ø9.4, AlTiN, 140°
- MB120.093 - Solid carbide twist drill 5xD, without internal cooling , Ø9.3, AlTiN, 140°
- MB120.092 - Solid carbide twist drill 5xD, without internal cooling , Ø9.2, AlTiN, 140°
- MB120.091 - Solid carbide twist drill 5xD, without internal cooling , Ø9.1, AlTiN, 140°
- MB120.090 - Solid carbide twist drill 5xD, without internal cooling , Ø9, AlTiN, 140°
- MB120.089 - Solid carbide twist drill 5xD, without internal cooling , Ø8.9, AlTiN, 140°
- MB120.088 - Solid carbide twist drill 5xD, without internal cooling , Ø8.8, AlTiN, 140°
- MB120.087 - Solid carbide twist drill 5xD, without internal cooling , Ø8.7, AlTiN, 140°
- MB120.086 - Solid carbide twist drill 5xD, without internal cooling , Ø8.6, AlTiN, 140°
- MB120.085 - Solid carbide twist drill 5xD, without internal cooling , Ø8.5, AlTiN, 140°
- MB120.084 - Solid carbide twist drill 5xD, without internal cooling , Ø8.4, AlTiN, 140°
- MB120.083 - Solid carbide twist drill 5xD, without internal cooling , Ø8.3, AlTiN, 140°
- MB120.082 - Solid carbide twist drill 5xD, without internal cooling , Ø8.2, AlTiN, 140°
- MB120.081 - Solid carbide twist drill 5xD, without internal cooling , Ø8.1, AlTiN, 140°
- MB120.080 - Solid carbide twist drill 5xD, without internal cooling , Ø8, AlTiN, 140°
- MB120.079 - Solid carbide twist drill 5xD, without internal cooling , Ø7.9, AlTiN, 140°
- MB120.078 - Solid carbide twist drill 5xD, without internal cooling , Ø7.8, AlTiN, 140°
- MB120.077 - Solid carbide twist drill 5xD, without internal cooling , Ø7.7, AlTiN, 140°
- MB120.076 - Solid carbide twist drill 5xD, without internal cooling , Ø7.6, AlTiN, 140°
- MB120.075 - Solid carbide twist drill 5xD, without internal cooling , Ø7.5, AlTiN, 140°
- MB120.074 - Solid carbide twist drill 5xD, without internal cooling , Ø7.4, AlTiN, 140°
- MB120.073 - Solid carbide twist drill 5xD, without internal cooling , Ø7.3, AlTiN, 140°
- MB120.072 - Solid carbide twist drill 5xD, without internal cooling , Ø7.2, AlTiN, 140°
- MB120.071 - Solid carbide twist drill 5xD, without internal cooling , Ø7.1, AlTiN, 140°
- MB120.070 - Solid carbide twist drill 5xD, without internal cooling , Ø7, AlTiN, 140°
- MB120.069 - Solid carbide twist drill 5xD, without internal cooling , Ø6.9, AlTiN, 140°
- MB120.068 - Solid carbide twist drill 5xD, without internal cooling , Ø6.8, AlTiN, 140°
- MB120.067 - Solid carbide twist drill 5xD, without internal cooling , Ø6.7, AlTiN, 140°
- MB120.066 - Solid carbide twist drill 5xD, without internal cooling , Ø6.6, AlTiN, 140°
- MB120.065 - Solid carbide twist drill 5xD, without internal cooling , Ø6.5, AlTiN, 140°
- MB120.064 - Solid carbide twist drill 5xD, without internal cooling , Ø6.4, AlTiN, 140°
- MB120.063 - Solid carbide twist drill 5xD, without internal cooling , Ø6.3, AlTiN, 140°
- MB120.062 - Solid carbide twist drill 5xD, without internal cooling , Ø6.2, AlTiN, 140°
- MB120.061 - Solid carbide twist drill 5xD, without internal cooling , Ø6.1, AlTiN, 140°
- MB120.060 - Solid carbide twist drill 5xD, without internal cooling , Ø6, AlTiN, 140°
- MB120.059 - Solid carbide twist drill 5xD, without internal cooling , Ø5.9, AlTiN, 140°
- MB120.058 - Solid carbide twist drill 5xD, without internal cooling , Ø5.8, AlTiN, 140°
- MB120.057 - Solid carbide twist drill 5xD, without internal cooling , Ø5.7, AlTiN, 140°
- MB120.056 - Solid carbide twist drill 5xD, without internal cooling , Ø5.6, AlTiN, 140°
- MB120.055 - Solid carbide twist drill 5xD, without internal cooling , Ø5.5, AlTiN, 140°
- MB120.054 - Solid carbide twist drill 5xD, without internal cooling , Ø5.4, AlTiN, 140°
- MB120.053 - Solid carbide twist drill 5xD, without internal cooling , Ø5.3, AlTiN, 140°
- MB120.052 - Solid carbide twist drill 5xD, without internal cooling , Ø5.2, AlTiN, 140°
- MB120.051 - Solid carbide twist drill 5xD, without internal cooling , Ø5.1, AlTiN, 140°
- MB120.050 - Solid carbide twist drill 5xD, without internal cooling , Ø5, AlTiN, 140°
- MB120.049 - Solid carbide twist drill 5xD, without internal cooling , Ø4.9, AlTiN, 140°
- MB120.048 - Solid carbide twist drill 5xD, without internal cooling , Ø4.8, AlTiN, 140°
- MB120.047 - Solid carbide twist drill 5xD, without internal cooling , Ø4.7, AlTiN, 140°
- MB120.046 - Solid carbide twist drill 5xD, without internal cooling , Ø4.6, AlTiN, 140°
- MB120.045 - Solid carbide twist drill 5xD, without internal cooling , Ø4.5, AlTiN, 140°
- MB120.044 - Solid carbide twist drill 5xD, without internal cooling , Ø4.4, AlTiN, 140°
- MB120.043 - Solid carbide twist drill 5xD, without internal cooling , Ø4.3, AlTiN, 140°
- MB120.042 - Solid carbide twist drill 5xD, without internal cooling , Ø4.2, AlTiN, 140°
- MB120.041 - Solid carbide twist drill 5xD, without internal cooling , Ø4.1, AlTiN, 140°
- MB120.040 - Solid carbide twist drill 5xD, without internal cooling , Ø4, AlTiN, 140°
- MB120.039 - Solid carbide twist drill 5xD, without internal cooling , Ø3.9, AlTiN, 140°
- MB120.038 - Solid carbide twist drill 5xD, without internal cooling , Ø3.8, AlTiN, 140°
- MB120.037 - Solid carbide twist drill 5xD, without internal cooling , Ø3.7, AlTiN, 140°
- MB120.036 - Solid carbide twist drill 5xD, without internal cooling , Ø3.6, AlTiN, 140°
- MB120.035 - Solid carbide twist drill 5xD, without internal cooling , Ø3.5, AlTiN, 140°
- MB120.034 - Solid carbide twist drill 5xD, without internal cooling , Ø3.4, AlTiN, 140°
- MB120.033 - Solid carbide twist drill 5xD, without internal cooling , Ø3.3, AlTiN, 140°
- MB120.032 - Solid carbide twist drill 5xD, without internal cooling , Ø3.2, AlTiN, 140°
- MB120.031 - Solid carbide twist drill 5xD, without internal cooling , Ø3.1, AlTiN, 140°
- MB120.030 - Solid carbide twist drill 5xD, without internal cooling , Ø3, AlTiN, 140°